Orthopaedic Medical Supplies!

How To Get Measurements Arm Sizes
Style	Model	Length in(cm)	Opening in(cm)
X-Small	FA-12	16 in (40 cm)	5.75 in (15 cm)
Small	FA-14	23 in (58 cm)	6 in (15 cm)
Medium	FA-16	28 in (71 cm)	7.75 in (20 cm)
Large	FA-18	31.5 in (80 cm)	9 in (22 cm)
Small Half Arm	HA-13	17.25 in (43 cm)	7.25 in (18 cm)
Half Arm	HA-15	20 in (51 cm)	8.75 in (22 cm)

Leg Sizes
Leg Cast Cover Style	Model	Length in(cm)	Opening in(cm)
X-Small	FL-12	19 in (48 cm)	7 in (18 cm)
Small	FL-14	29 in (73 cm)	13 in (33 cm)
Medium	FL-16	32.5 in (82 cm)	15.75 in (40 cm)
Large	FL-18	37 in (94 cm)	19 in (48 cm)
Small Half Leg	HL-13	21in (53cm)	9in (23cm)
Large Half Leg	HL-15	23.5 in (59 cm)	11 in (28 cm)

 

 

How To Get Measurements

1) MEASURE LENGTH ARM: Measure from the tip of the middle finger to the top end of the cast or prosthetic. If the cast goes above the elbow, follow the bend of the arm. LEG: Measure from the back of the heel (from the floor) to the top end of the cast or prosthetic. Choose a XeroSox that is at least 2 inches LONGER than your measurement. Don't worry if the XeroSox is too long. The excess material will flatten down when the air is pumped out.

2) MEASURE OPENING ARM: Measure the circumference of the arm just above the cast or bandage (If the end of the cast is very close to the elbow, measure mid bicep.) LEG: Measure the circumference of the leg just above the cast or bandage (If the end of the cast is very close to the knee, measure mid thigh.) Choose a XeroSox that is at least 2 inch SMALLER than your measurement. To create a good vacuum seal the opening needs to be smaller than your limb.