Orthopaedic Medical Supplies!

	1. Slide on XeroSox - Stretch on the XeroSox so that it completely covers the cast or bandage plus an additional inch. The top should be smooth against the skin. Be careful of sharp objects. A fingernail, sharp fiberglass threads on a cast, can rip the XeroSox. Putting a soft ace bandage or a tube sock with the toe cut out over the fiberglass cast will help reduce sharp fiberglass threads from cutting into the XeroSox.
	2. Pump out the air - Continue to press the bulb until it remains flat. Push on the safety cap. As long as the bulb is collapsed, the vacuum is intact and the XeroSox cannot leak or come off.
	3. Slide off - When you are done using the XeroSox, simply lift up the cuff to let the air back in. The XeroSox should now be loose. Simply slide it back off.
Note - Do not leave on for extended periods of time. We recommend removing it after every 45 minutes of use. Do not use in vascular compromised patients. Steady yourself in wet slippery areas. This product contains natural rubber latex, which may cause allergic reactions. Always follow your doctor's advice.